BP AUTOMOTIVE 1997-2006 DBC LS1 Standalone Harness with T56 or Non-Electric Transmission
$500.00
Description
Details
Our harnesses are designed for installing these new GM EFI engines into your ride, whatever it may be. This harness is specific for 1999-2007 4.8, 5.3, and 6.0 Vortec engines with a T56 or Non-Electric Transmission and a Drive By Cable Throttle Body. This harness is Plug and Play with the engine and transmission, and only requires a 4 wire hook up to fire up the engine! All harnesses are made with GM color coded TXL wire to meet or exceed OEM standards! All circuits that are ran by heat like the O2 sensor circuits are covered with 1200* Fiberglass braid. We only use Delphi, Kostal, Bosch, Molex, and Yazaki connectors, terminals, and seals on our harnesses, just like an OEM harness. All connectors that have Connector Position Assurance Lock on a factory harness have them on our harnesses also. The harnesses also include a Delphi Grommet that can be positioned on the main harness line to seal your firewall. Harnesses are 4 to 5 foot long from the engine and the PCM and Fuse Block can be mounted in the passenger compartment. Harnesses are for pre-emissions vehicles or for off road use only. Harnesses do not have provisions for EGR, AIR, EVAP, or Rear O2 Sensors. We can add these for an additional cost, however in most cases they are not needed. Harnesses also require the removal of the VATS system from the PCM as well as the emissions removal from the PCM. BP Automotive offers this service with a discount when purchasing a new harness. This harness also requires the use of a Red and Blue PCM service numbers 12200411 or 9354896, also available through BP Automotive.
Additional Information
Length
13
Height
4
Width
13
BTR SKU
H301
Weight
6.8950
Manufacturer
BP Automotive