Description

Details

EWP150 ELECTRIC WATER PUMP PART NO: 8060

The EWP150 Alloy Electric Water Pump – univresal fit, do-it-yourself, easy to install water pump designed to replace or compliment your existing belt-driven mechanical water pump. By removing the parasitic power losses of a belt-driven water pump the EWP can provide up to 10kW of extra power, increased torque, increased cooling capacity, eliminating heat soak and provide better engine temperature control.

Technical Specifications

Technical Specifications

Kit Contents

Kit Contents

Operating voltage

3V DC to 15V DC

EWP150 Alloy Assy

1

Maximum current

10A

Wiring Harness with 10A Fuse

1

Flow rate

150 L/min (40 US gal/min)

Rubber Sleeves 3mm

2

Operating temp

-40 to 130C (-40 to 266F)

Hose Clamps

2

Pump design

Clockwise Centrifugal

Hardware Bag:
Relay, Scotch Lock, Ring Terminal, Self Tapper

1

Pump Material

Aluminium (Powder Coated)

Hardware Bag:
Relay, Scotch Lock, Ring Terminal, Self Tapper
1

Pump weight

1,170 grams (2.60lbs)

Burst pressure

500 kPa (72.5 psi)

Dimensions

128mm x 85mm x 188mm

Hose Sizes

38mm to 51mm (1-1/2″ to 2″)

Inlet & Outlet

Internal Thread AN-16

This high capacity EWP®150 (40 US Gal/Min) is designed to replace and/or complement the existing belt driven mechanical water pump and when fitted with the optional Digital Controller (Part # 8020), replaces the thermostat.
The major benefits a EWP®150 offers are:

> Minimise the parasitic power losses running a mechanical water pump at high speed when not needed
> Maximise engine warm-up & minimise the effects of heat soak by operating the EWP®150 after engine shut down.

The EWP®150 has the advantage of offering more consistent coolant flow independent of the engine revs. The fitment of the EWP® & Fan Digital Controller to your engine, which is scientifically calibrated to manage the volume/flow of engine coolant with the corresponding increase in coolant temperature within the engine’s cooling system.

From start-up, the EWP® & Fan Digital Controller will ‘system check’ the EWP®150 and Thermatic Fan operating the pump and fan for approx. 10 seconds. Low engine temperature, low flow (10-on – 30-off pwm) reduces engine warm-up time, arriving at your targeted/set temperature quicker, assisting control the engine temperature within your -5 to +3 degree targeted/set temperature range. The Electric Thermatic Fan/s will be deployed at +3?C above targeted/set temp if slower travel (traffic) or engine idle conditions continue. The EWP® & Fan Digital Controller will continue operating after a hot engine shut down for a approx. 2 minute period to help prevent damaging heat soak.

Additional Information

Length

6.5

Height

3.75

Width

7.25

BTR SKU

DC8060

Weight

3.5000

Manufacturer

Davies Craig